Canon pixma TS3122 is a compact and user-friendly printer gives you a wireless printing and scanning capability.

  • Open the package and get started with doing the initial setup of the printer.
  • Locate the ink cartridges, you will be given two cartridges which are black and colour cartridges.
  • Connect the power cable's one end to the back of the printer and other end to the power source. Always connect the power end to wall outlet and not to the power strip.
  • Now locate the printer access door in the front, pull the access door to find the ink carriage and print heads. The ink carriage will move in the access area when you open it, please wait and allow the carriage to rest.
  • Now pick the cartridges give them a gentle shake, remove the clear orange tape before inserting them.
  • The black cartridge goes to right side slot and the colour cartridge goes to the left side slot.
  • Pick the papers and align them by tapping on the flat surface. Move the slider in the paper tray towards left before placing the papers in.
  • Once the papers are in move the slider towards to paper for the perfect alignment.
  • Once you are done with the initial setup you must be ready to install the ij canon TS3122 printer to your computer as per your preferred mode of connection.
  • You can either use the disc attached with the printer for driver software installation or download it from the Web.
  • Visit the website and enter the printer model PIXMA TS3122 in the search bar, the site will bring up the available drivers.
  • Select the full package driver software and download it. Open and run it once it's done.
  • If it's a first time setup the software will put the printer to the network, if not the user must do the wireless setup from the printer control panel.
  • To know how to connect the printer to wireless network read the instructions given in the article below.
  • Speak to our technical experts for any help or assistance regards to the wireless setup.
  • You must install driver software in order to make the computer to communicate with the printer.
  • The driver software can be installed by the CD or you can download it from the internet.
  • Follow the below steps to download and install the driver software
  • Open your safari or any preferred browser to reach the manufacturer's website.
  • On the search bar type PIXMA TS3122 and click on search.
  • Choose your operating system and select the full version driver software.
  • Wait until the download is completed. Open and run the driver software.
  • If it's a first time setup the software will put the printer to the network, if not the user must do the wireless setup from the printer control panel.
  • To know how to connect the printer to wireless network, read the instructions given in the article below.
  • Speak to our technical experts for any help or assistance regards to wireless setup.
  • Before beginning the wireless setup, ensure that your router is ready and up.
  • Connect the printer to the power source and turn it on. The green light next to the power button will be lit if the printer is on.
  • There are two ways to connect the TS3122 printer to your wireless network.
  • One is easy wireless connects and other one is the WPS method.
  • To proceed with the easy wireless connect, you must reset the network status of the printer.
  • If you see the blue light flashing press stop button, blue light will stop flashing.
  • Press the direct button until the wireless icon in the display starts to flash, which indicates that the printer is ready to connect.
  • Now using the driver software do the wireless setup, the software will find the printer as the network status of the printer had been reset.
  • Connecting the TS3122 printer to wireless network by WPS method requires the user to have access to the Router.
  • First if you see the Blue light next to the power button flashing, click on the stop button the light will stop flashing.
  • Now press the network button which is right below to the power button and the wireless icon in the display will starts flashing.
  • Now locate a WPS button in your router which conventionally looks small located at the back of your router.
  • Once you located the WPS button on the router, press and hold it for 5 to 6 seconds.
  • The WPS button must be pressed within two minutes after wireless icon began flashing.
  • Signal bar will appear next to the wireless icon if the connection is successful.
  • Now using the driver software do the printer setup, the software will find the printer as the Printer was installed to the network.
  • Speak to our technical experts for any help or assistance regards to wireless setup.
  • TS3122 gives the scanning capability user the user to scan from the scanner glass.
  • IJ start scan utility software allows you to manage and control the scanning operation.
  • Scan utility software comes along with the full version driver software.
  • Place the document on the glass or feeder which you wanted to scan
  • Open start and Type the program name IJ start scan utility, open the program and click on scan.
  • If it is a MAC computer open finder and type IJ start scan utility.
  • Select the destination folder for the scanned document to be saved.
  • Speak to our technical experts for any help or assistance regarding the scanner setup.
  • Printer offline issues mostly occur due to the power fluctuation or the network fluctuation.
  • Offline issues cannot be prevented but it could be resolved if you follow the below steps.
  • First try restarting the printer, restarting the device is the first troubleshooting step which can be done to fix any communication issues.
  • Check if your internet connection is active. If you find there is no internet connection try restarting your router.
  • If restarting the Router didn't fix the internet, call your service provider.
  • Speak to our technical experts for any help or assistance to fix the printer offline issues.
  • When the printer is not responding it could be any hard ware or network issues.
  • To fix the network issues, follow the instructions given above for the offline issue.
  • Hardware problems could be like paper jam, ink mismatch or printer head problem.
  • To fix the paper Jam issues open printer access door, before that you must turn off the printer and unplug the power cable.
  • If you find the ink cartridge holder over the paper, move it all the way towards right. Now pull the jammed paper out.
  • Make sure you have inserted the correct model of ink cartridges.
  • After trying all the steps restart the printer once.
  • If the printer still didn't respond reach our tech experts to fix it right away.
  • To perform the Mobile printing, ensure that the mobile and Printer was connected to the same network.
  • Go to settings and select more connection settings.
  • Click on printing and select Download plugins.
  • Play store will bring up the canon Printer services, just download and install the program.
  • Now the Canon printer services will be added and used as a default printing program.
  • Using the program you can print wirelessly.
  • If the printer still didn't respond reach our tech experts to enable mobile printing right away.
1 / 3
2 / 3
3 / 3