Canon Pixma TS3122 Setup

Canon Pixma TS3122 is a compact and user-friendly printer that gives you wireless printing and scanning capability.

  • Open the package and get started with doing the initial setup of the printer.
  • Locate the ink cartridges; you will get black and color cartridges along with the printer.
  • Connect the power cable’s one end to the back of the printer and the other end to the power source. Always connect the power end to the wall outlet and not to the power strip.
  • Now locate the printer access door in the front, pull the access door to find the ink carriage and print heads. The ink carriage will move in the access area when you open it; wait and allow the carriage to rest.
  • Now pick the cartridges, give them a gentle shake, remove the clear orange tape before inserting them.
  • The black cartridge goes to the right side slot and, the color cartridge goes to the left side slot.
  • Pick the papers and align them by tapping on the flat surface. Move the slider in the paper tray towards the left before placing the papers in it.
  • Once the papers are in, move the slider towards the paper for the perfect alignment.
canon-pixma-ts3122-setup

How to Install Canon Pixma TS3122 to a Windows Computer

canon-pixma-ts3122-windows-setup
  • Once you are over with the initial setup, you must be ready to install the ij canon TS3122 printer to your computer as per your preferred mode of connection.
  • You can either use the disc attached with the printer for driver software installation or download it from the Web.
  • Visit the website and enter the printer model PIXMA TS3122 in the search bar; the site will bring up the available drivers.
  • Select the full package driver software and download it. Open and run it once it gets downloaded.
  • If it’s a first-time setup, the software will put the printer to the network; if not, the user must do the wireless setup from the printer control panel.
  • To know how to connect the printer to the wireless network, read the instructions given in the article below.
  • Do speak to our technical experts for any help or assistance regards to the wireless setup.

How to Install Canon Pixma TS3122 to a Mac Computer

ij-start-canon-pixma-ts3122-mac-setup
  • You must install the driver software to make the computer communicate with the printer.
  • Install the driver software from the CD, or you can download it from the internet.
  • Follow the below steps to download and install the driver software
  • Open your safari or any preferred browser to reach the manufacturer’s website.
  • On the search bar, type PIXMA TS3122 and click on search.
  • Choose your operating system and select the full version driver software.
  • Wait until the download gets completed. Open and run the driver software.
  • If it’s a first-time setup, the software will put the printer to the network; if not, the user must do the wireless setup from the printer control panel.
  • To know how to connect the printer to a wireless network, read the instructions given in the article below.
  • Do speak to our technical experts for any help or assistance regards to the wireless setup.

Connect Canon Pixma TS3122 to a Wireless Network

  • Before beginning the wireless setup, ensure that your router is ready and up.
  • Connect the printer to the power source and turn it on. The green light next to the power button will lit if the printer is on.
  • There are two ways to connect the TS3122 printer to your wireless network.
  • One is easy wireless connects and, another one is the WPS method.
  • To proceed with the easy wireless connection, you must reset the network status of the printer.
  • If you see the blue light flashing, press the stop button, the blue light will stop flashing.
  • Press the direct button until the wireless icon in the display starts to flash, which indicates that the printer is ready to connect.
  • Now using the driver software, do the wireless setup. The driver software will find the printer, as the printer’s network status had been reset.

Connect Canon Pixma TS3122 Wireless using WPS Button

  • Connecting the TS3122 printer to the wireless network by the WPS method requires access to the router.
  • First, if you see the Blue light next to the power button flashing, click on the stop button the light will stop flashing.
  • Now, press the network button, which is right below the power button and, the wireless icon in the display will start flashing.
  • Now, locate a WPS button in your router, which conventionally looks small at the back of your router.
  • Once you find the WPS button on the router, press and hold it for 5 to 6 seconds.
  • Press the WPS button within two minutes after the wireless icon began flashing.
  • The Signal bar will appear next to the wireless icon if the connection is successful.
  • Now use the driver software to do the printer setup; the software will find the printer as the printer gets installed to the network.
  • Do speak to our technical experts for any help or assistance values to the wireless setup.

Canon Pixma TS3122 Scanner Driver

  • TS3122 gives the scanning capability user the user to scan from the scanner glass.
  • IJ start scan utility software allows you to manage and control the scanning operation.
  • Scan utility software comes along with the full version driver software.
  • Place the document on the glass or feeder which you wanted to scan
  • Open start and Type the program name IJ start scan utility, open the program and click on scan.
  • If it is a MAC computer, open the finder and type IJ start scan utility.
  • Select the destination folder for the scanned document to be saved.
  • Do speak to our technical experts for any help or assistance regarding the scanner setup.
canon-pixma-ts3122-scanner-driver

Canon ts3122 scanner

  • The ij start canon ts3122 printer needs a scanner software to scan the preferred documents.
  • The scanner tray is present at the top of the printer, which can be accessed while placing the document to be scanned.
  • Download the perfect updated ij scan utility package for your printer from our website.
  • Install the scanner software on your operating system and click on the windows search to open the program.
  • Select windows ->start ->scan -> New  scan -> update the scan properties -> select scan -> ok.
  • Open the scanner tray and place the document to be scanned in a way, printed side facing downwards.
  • On the scanner software page select the format and location of the scanned file to be saved.
  • Click on scan option and the printer begins to scan the document placed on the scanner tray.
  • The scanned copy of the document is directly sent to the destination folder on your PC .
  • Any document from your PC can also be scanned directly via ij scan utility software.
  • For any queries related to canon ts3122 scanner, do reach our support.

Canon Pixma TS3122 Offline

  • Printer offline issues mostly occur due to power fluctuation or network fluctuation.
  • Offline issues, cannot be prevented but, they could get resolved if you follow the below steps.
  • First, try restarting the printer; restarting the device is the first troubleshooting step that can fix any communication issues.
  • Check if your internet connection is active. If you find there is no internet connection, try restarting your router.
  • If restarting the router did not fix the internet, call your service provider.
  • Do speak to our technical experts for any help or assistance to fix the printer offline issues.

Canon Pixma TS3122 Not Printing

  • When the printer is not responding, it could be any hardware or network issues.
  • To fix the network issues, follow the instructions given above for the offline issue.
  • Hardware problems could be like paper jams, ink mismatch, or printer head problem.
  • To fix the paper Jam issues, open the printer access door; before that, you must turn off the printer and unplug the power cable.
  • If you find the ink cartridge holder over the paper, move it towards the right. Now pull the jammed paper out.
  • Make sure you have inserted the correct model of ink cartridges.
  • After trying all the steps restart the printer once.
  • If the printer still did not respond, reach our tech experts to fix it right away.
ij-start-canon-ts3122-not-print

Canon Pixma TS3122 Mobile Printing

  • To perform the Mobile printing, connect the printer and the mobile to the same network.
  • Go to settings and select more connection settings.
  • Click on printing and select Download plugins.
  • Play store will bring up the canon printer services; download and install the program.
  • Now the Canon printer services will be added and used as a default printing program.
  • Using the program, you can print wirelessly.
  • If the printer still did not respond, reach our tech experts to enable mobile printing right away.